Turn a Selfie Into a Wipe Me Down Dance Video Quickly
Upload one selfie, check the photo requirements, choose a look, set resolution and length, then fix the first Wipe Me Down result step by step and retry.

Turning a single selfie into a Wipe Me Down dance video is a fixed process. You check the photo, upload it, choose a look, set the render size, generate, and then correct the first output if needed. This guide covers each stage in the order the studio uses it.
What to check before you open the studio
The first thing to check is the selfie itself. The generator takes one still image and builds a new performance around the person in that image. It does not take a video clip, and it does not transfer motion from another recording.
The file must be a JPG, PNG, or WebP image up to 10 MB. The subject should be one person or animal. The face and body should be visible from the front or a three-quarter angle. Waist-up and whole-body shots both work, but the model needs enough body detail to move the arms and legs without inventing them.
The second thing to check is your account. Email sign-up starts at 0 credits. Google sign-in accounts can claim 10 free credits a day for three days. Each account also gets one free preview render at 480p for 5 seconds while the daily preview budget lasts. That preview is worth using before you spend credits because it shows whether the selfie and the selected look are working at a small size.
The third thing is a clear goal. Decide whether the subject should bounce, throw one arm, spin, or end with a pose. A single clear movement beats a list of four actions.
Selfie requirements in detail
Use this checklist before you upload:
- The frame contains one subject.
- The subject faces the camera or turns no more than a three-quarter angle.
- The face is sharp and not covered by sunglasses, hair, or a hat brim.
- The upper body or whole body is visible, with space above the head and around the sides.
- The light falls evenly across the face and body.
- The file is JPG, PNG, or WebP, under 10 MB.
- The image has no heavy filter, text sticker, or watermark across the face.
A blurry selfie gives the model too little face data to hold the likeness. A group photo forces the model to decide who should dance, and it often tries to animate everyone. A photo where the subject is half in shadow tends to carry that shadow into the motion. Crop out extra people and remove heavy filters before you upload.
Step by step: selfie to dance video
Here is the full sequence as a numbered checklist.
- Open the studio and sign in.
- Upload the prepared selfie in Photo to video mode.
- Select one of the four looks.
- Set resolution, clip length, and frame.
- Review the prompt text. In photo mode you can leave it empty and use the chosen look as written.
- Press Generate.
- Read the credit badge at the Generate button before you start, so the cost is not a surprise.
- Wait for the job to finish, then download the MP4.
The numbered order matters because the look and the settings are cheaper to change before a render than after.
Choosing a look
The studio offers four looks. Each look is a starting prompt that you can copy or edit before spending credits.
| Look | What it does | Use it when | | -------------- | ------------------------------------------- | ---------------------------------------------------- | | Classic bounce | Steady two-step with a locked camera | You want a clean, grounded version of the trend | | Hype | Higher energy and closer camera feel | You want the clip to feel fast and aggressive | | Smooth groove | Slower tempo and softer light | You want a relaxed, low-key clip | | Cute | Small bright steps and a friendlier palette | Your selfie is close framed, or the subject is a pet |
You can keep the look exactly as it is. You do not need to write a long prompt. In photo mode, the selfie already settles who the subject is, so the prompt text should only correct the action if the look misses something.
Render settings and credit cost
The cost on the Generate button changes with resolution, length, and format. It is shown before you press Generate.
| Setting | Options | Credit effect | | ---------- | -------------------- | ---------------------------------------------------------- | | Resolution | 480p, 720p, 1080p | 480p is 12 credits for 12 seconds, 720p is 26, 1080p is 64 | | Length | 5, 8, 10, 12 seconds | Longer clips scale from the 12 second figure and round up | | Frame | 9:16, 16:9, 1:1 | Frame does not change the credit total |
A standard 720p 12 second render costs 26 credits. The $9.90 Single pack has 10 credits, so it is not enough for a standard render. The $19.90 Duo Pack has 30 credits and is the smallest pack that covers one standard 720p 12 second clip. Check the pricing page for the full list of packs and subscriptions.
For a first test, use the free 480p 5 second preview if it is available. For a cheap paid test, set the resolution to 480p. A 480p 12 second render costs 12 credits, which is a lower-risk way to see if the selfie holds up before paying for 720p or 1080p.
Generating the first result
After you press Generate, wait for the job to finish. Most standard renders take a couple of minutes. A 1080p render takes longer because it produces more pixels.
Do not submit the same job again while it is running. Every submission is a separate charge. If the render fails, the credits go back to the balance they came from, so a failed attempt costs time rather than credits.
Fixing the first result
Most first renders are usable but not perfect. The fix is to change one input at a time, not to randomize all of them.
| Problem you see | Likely cause | First change to make | | --------------------------------- | --------------------------------------------------------- | -------------------------------------------------------- | | Face looks soft or changes | Blurry selfie or face too small in frame | Upload a sharper photo with the head larger in the frame | | Arms drift or extra limbs appear | The action is too complicated for the photo | Simplify the prompt to one clear movement | | Two people appear from one selfie | The source has another person, or the prompt mentions one | Crop to a single subject and remove crowd words | | Motion smears | Several actions at once | Rewrite as one dominant action for the full clip | | Look is ignored | Prompt text contradicts the look | Clear the prompt field and let the look carry the scene | | Clip feels empty | 16:9 frame with a small subject | Switch to 9:16 to keep the subject central |
Change one variable per attempt. Keep the selfie, look, and prompt saved so you can compare results. The photo-to-dance troubleshooting guide has more fixes if you need them.
After you get a good clip
The finished file is an MP4 at the resolution you selected. Nothing is stamped over the image. Keep the source selfie and the prompt text with the video so a second attempt is repeatable. Vertical 9:16 clips post directly to short-form feeds without letterboxing. For help with downloading and sharing, read the export and share guide.
FAQ
What photo works best for a Wipe Me Down selfie video?
Use a sharp, well-lit photo of one person, taken from the front or a three-quarter angle. Waist-up or whole-body framing works best. The face and body should be clearly visible, with no heavy filters, no group, and no turned-away pose. JPG, PNG, and WebP files up to 10 MB are accepted.
How many credits does the first standard render need?
A standard 720p 12 second render costs 26 credits. The Single pack at $9.90 has 10 credits and is not enough. The Duo Pack at $19.90 has 30 credits and covers one standard clip. 480p at 12 seconds costs 12 credits, and 1080p at 12 seconds costs 64 credits.
Is there a free way to test before paying?
Each account gets one free preview render at 480p for 5 seconds while the daily preview budget lasts. Google sign-in accounts can claim 10 free credits a day for three days. Email sign-up starts at 0 credits. There is no unlimited free plan.
Can I use the same selfie for another attempt?
Yes. You can change the look, resolution, length, or prompt text and reuse the same selfie as many times as you like. Each render is charged separately at the settings you choose.
What should I change first if the face looks wrong?
Upload a sharper selfie with the face larger in the frame. If the selfie is already sharp, reduce the prompt to one movement and use the 9:16 frame. Blurry source images and group shots are the most common causes of face drift.
Turn your own selfie into the clip
指南里的提示词已经载入,可以修改。你只需要一张照片。